Amplificateur de caisson de graves mono audio hautes performances

€ 449,00449.0 pièce
Product Actions
Add to cart options

En stock. Temps de livraison estimé à 1-2 jours ouvrés

Nombre de canaux/Type 4 canaux 5 canaux Mono / Subwoofer Mono / Subwoofer
Impédance de sortie 4 ohms 100W rms x 4, <1.0% THD + N 75W rms x 4, <1.0% THD + N 380W rms x 4, <1.0% THD + N 700W rms x 4, <1.0% THD + N
Impédance de sortie 2 ohms 120W rms x 4, <1.0% THD + N 100W rms x 4, <1.0% THD + N 600W rms x 4, <1.0% THD + N 1000W rms x 4, <1.0% THD + N
Puissance de sortie pontée 240W rms x 4, <1.0% THD + N 200W rms x 4, <1.0% THD + N - -
Puissance de sortie totale (crête) 1500W 2300W 1500W 2800W
Rapport signal-bruit >75db >75db >50db >80db >80db
Frequentiebereik 10-100kHz 10-100k (main) 10-320 (sub) 15Hz-320Hz 15Hz-320Hz
Input Sensitivity 200mV-20V 200mV-20V 200mV-20V 200mV-20V
Filtre actif variable Oui Oui Oui Oui
Bass Boost variable Bass EQ Oui Oui Bass EQ
Connexions d’entrée High & low-level (RCA) High & low-level (RCA) High & low-level (RCA) High & low-level (RCA)
Raccordements des haut-parleurs 4 5 2 2
Connexions de sortie de signal Oui Non Non Non
Dimensions (L x W x H) 10-1/2" x 7-1/8" x 2-3/16"
(266mm x 180mm x 55mm)
13-1/4" x 7-1/8" x 2-3/16"
(335.3mm x 179.6mm x 54.2mm)
10-1/2" x 7-1/8" x 2-3/16"
(265.3mm x 179.6mm x 54.2mm)
13-1/4" x 7-1/8" x 2-3/16"
(335.3mm x 179.6mm x 54.2mm))
  En savoir Plus En savoir Plus En savoir Plus En savoir Plus
Amplificateurs classe D GTR Stadium : Découvrez le grand son (le son révélé)

Les amplificateurs GTR, mono et large bande, multicanaux, produisent le rendement et la puissance que vous attendez d'amplificateurs de classe D, ainsi que les performances que vous attendez de JBL. Chaque modèle de la gamme accepte des entrées de haut niveau ou bas niveau, ce qui permet d'intégrer les amplificateurs JBL Stadium à pratiquement tout système audio embarqué, y compris les systèmes d'origine. Les amplificateurs 4 et 5 canaux offrent la diffusion audio Bluetooth®, la technologie de restauration de la musique exclusive Clari-Fi™ qui analyse et améliore en temps réel la qualité audio des fichiers compressés, un mode Party à jumelage multiple qui permet à tous les occupants du véhicule de diffuser de la musique et un panneau de commande monté dans l'habitacle. Les amplificateurs GTR vous offrent la puissance nécessaire pour découvrir de nouvelles expériences de votre système audio embarqué.

Caractéristiques Générales

Peak Power 2600W

Audio Specifications

Signal-to-Noise Ratio >80dB (ref 1W output @ 2 )
4-Ohm Power Output 700Wrms x 1, <0.1% THD+N
2-Ohm Power Output 1000Wrms x 1, <0.1% THD+N
  • 1 amplificateur
  • 1 panneau de commande monté dans l'habitacle
  • 2 fusibles de rechange
  • Mode d'emploi

Search Result For ""

GTR-1001 est évalué 5.0 de 5 de 3.
Rated 5 de 5 de par GO JBL !!! Heb voor myn verjaardag een gtr1001 gekocht en ben er echt heel blij mee ! Had zoveel power niet in zo een formaat verwacht ! Klasse JBL !!! nu wacht ik nog op een sterkere 2ohm JBL woofer op de markt en We kunnen tot het uiterst !
Date de publication: 2018-06-06
Rated 5 de 5 de par Great amp that puts out power in small foot print I have this amp for 2 weeks and I like how much power this sub can handle. I am pushing 2 s3-1224 with it and it does amazing job. This thing doesnt even heat up. Its class d amp so it draws very little power. I wish it comes with the bass control knob. But I am planning to buy the controller.
Date de publication: 2018-04-29
Rated 5 de 5 de par GREAT AMP! I purchased this about 6 months ago. The features, sound, and reliability are amazing! I run this amp high for hours at a time and it doesn't even get hot. I've had several other amps, but this one, by far is not only a powerhouse, it is efficient, and reliable. Best amp I've purchased yet!
Date de publication: 2018-02-01
  • y_2019, m_4, d_18, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_fr_BE, sid_gtr-1001_, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_jbl

The gtr-1001 has 2 sets of speaker outputs. I have a single 2ohm load I want to put 1000w rms into, will this amp work? If so which terminals do I connect the one positive and one negative? Thankyou

Posée par: Pengovx
GTR-1001 has a power Output 1000 Watts RMS at 2 Ohms and&nbsp;a single channel amplifier with two speaker terminals, wired in parallel, internally. Connecting to one set of terminals will get the exact results you desire.. &nbsp;So it will definitely work with the subwoofer that you are planning to install. &nbsp;You just need to plug in the subwoofer to one set of speaker outputs. &nbsp;
Répondue par: Drin at Customer Service
Date de publication: 2018-02-24

Hey Randy! Just ordered the gtr-1001 and 2 s3-1224's. I only have 1 gauge wiring and the amps recommended for 4! I need to know if 1 gauge will fit before I start running my wire. Thanks Randy!

Posée par: Brenden McKee
You can step down your 1 Gauge power wire to 4 Gauge using an adapter or running the 1 awg to a fused distribution block that outputs with multiple 4 awgs.
Répondue par: JBL Jeremy
Date de publication: 2017-12-02

I just bought this amp. The 80hz mark for the FREQ is in a different spot on mine compared to these photos. I searched online for this amp and photos show it both ways. Which one is the correct marking?

Posée par: Russ74
The 80hz location on the amp is correct at 1 o clock. Other photos you see online and in the manual of it being at the 11 o clock position was a prototype.
Répondue par: Russ74
Date de publication: 2018-09-04

For an amp to produce 2600 watts , it would draw 216 amps. for it to continuously produce 1000 watts it would draw 83 amps. What size fuse should I use on my battery?

Posée par: Jermz
The appropriate fuse for the GTR-1001 is 60 Amps. Please note that it should be within 18&quot; of the battery.
Répondue par: Drin at Customer Service
Date de publication: 2018-08-28

I have a single subwoofer with 4 ohm DVC and the GTR-1001 and want to get the full output of 1000 watts at 2 ohms. I just need to install the jumpers onto the sub which wires that at 2 ohms and connect the +/- on the sub to either set of +/- on the amp?

Posée par: crippy2
Yes that is correct
Répondue par: Boonieg
Date de publication: 2018-02-24

Is this amp cea-2006 certified for rated power?

Posée par: Ray35
Yes, All of our car audio amplifiers are CEA 2006 rated.
Répondue par: Mario at Customer service
Date de publication: 2019-04-12

I had Best Buy install this to push one JL audio w6v2. He's trying to tell me the amp should pump 32 volts when set to push 600 watts at 2 ohms, but it's barely doing 20 volts at 3/4 gain. Saying amp rating is false. I think he has something set wrong

Posée par: PuertoRicanStyL
We would like to work with you directly to help you with your issue. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Répondue par: Steven M
Date de publication: 2019-03-02

Is the GTR-1001 a class D subwoofer amp,or is it a D series subwoofer whatever it is the draws less from the battery &amp; doesn't overheat? &nbsp;How many watts is the amp?

Posée par: btbtbt
The GTr-1001 is a class D Amplifier. Every GTR amplifier, including the full-range models, is a Class D. These high-efficiency, low-heat amps generate a lot of power without drawing much current, and feature small footprints. This amplifier puts out 700 watts of RMS power at 4 ohms, and 1000 watts of RMS power at 2 ohms.
Répondue par: Joe G at Customer Service
Date de publication: 2017-12-02
  • y_2019, m_4, d_19, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_34
  • loc_fr_BE, sid_gtr-1001_, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_jbl