Caisson de basses.

Product Actions
Completely rethinking how to create great bass from a 12" subwoofer.

JBL a tiré profit de toutes les ressources d’ingénierie pour développer le meilleur caisson de basses selon le rapport qualité/prix. La géométrie de champ symétrique assure un déplacement linéaire du cône et de faibles distorsions à tout niveau de volume en créant un champ magnétique uniforme autour de la bobine. Panier moulé.

N° d’article W12GTIMKII

Caractéristiques Générales

Size 12
Series Gti

Audio Specifications

Peak Power 4000W
Power Handling (Peak) 4000W
Nominal Impedance 3 or 12 ohms
Frequency Response 18Hz–1kHz ±3dB
Power Handling (RMS) 700W
Sensitivity (2.83V@1m) 91dB


Mounting Depth (in) 10-1/4
Mounting Cutout Diameter (mm) 280
Mounting Depth (mm) 260
External Diameter (mm) 312
External Diameter (in) 12-1/4
Mounting Cutout Diameter (in) 11

Woofer Specifications

Driver Radiating Area (Sd – in2/cm2) 74.3/480
Magnetic Gap Height (Hag – in/mm) 1.0/25.4
Voice Inductance (Levc – mH) 0.75 (parallel VC connection)
Voice Coil Height (Hvc – in/mm) 2.6/66.04
Suspension Compliance (Cms – ?m/N) 135.28
Voice Coil vDual 6-ohm Differential Drive®, 3" (76mm) diameter
Compliance Volume (Vas – ft3 / l) 1.58/44.75
Maximum Excursion (Xmax –in/mm) 0.8/20.32
Vented Polepiece Yes
Progressive Spider Yes
Surround Nitrile-butylene rubber – one-piece with gasket
Low-Frequency Transducer 12" (305mm) Kevlar®-impregnated paper cone
Total Q (Qts) 0.51
Diecast Aluminum Frame Yes (vented)
Motor Force Factor (Bl – Tm) 14.64 (parallel VC connection)
Electrical Q (Qes) 0.55
Voice Coil DC Resistance (Revc – ohms) 3.2 (parallel VC connection)
Mechanical Q Q (Qms) 6.68
  • 1 W12GTi MkII subwoofer
  • 8 10/24 machine screws
  • 8 T-nuts
  • Enclosure design sheet
  • Owner’s manual

Search Result For ""

W12GTi MkII est évalué 4.5 de 5 de 8.
Rated 5 de 5 de par the lowest frequency on 12 inch subwoofer this is the BEST lowest Frequency 12 inch Subwoofer, and having a big Power... others just 20Hz, but this Sub have 18Hz.. make a sound Quality the best Ever..
Date de publication: 2017-04-14
Rated 5 de 5 de par AAA+ I have been building car audio sub woofer enclosures since 1985 and in that time I have had the chance to play with almost every car audio sub ever made. These Wgti subs are still by far my favorite sound quality woofer , I listen to my music loud push my system hard daily for 1 to 2 hours at a time and these things never miss a beat or mud a single note, the note separation and articulation of this woofer is second to none , the guitar strings and drums SNAP like they each have their own source ..... if these woofers don't drop your jaw they were installed wrong ( very wrong ) I am running two 12" powered by a Crown BPX 2200.1 and I have 2 enclosures that I am bouncing back and forth with 4.0cf3 tuned at 28hz and 4.0cf3 tuned at 30hz and I think I'll be sticking with the 28hz enclosure once I add midbass it's really too bad they are now a discontinued product , I'v enjoyed working with them not shure what I'll do once I wear these ones out though everything else is a downgrade IMO
Date de publication: 2016-06-09
Rated 5 de 5 de par Absolutely insane... I did not know one could experience too much bass. How sadly mistaken, I was. I wired it up by the 3 ohm configuration through a 2 cubic-yard labyrinth box, and a 3k watt amp (1500 rms)... I could not find enough settings to drop to minimum and turn off for my ears to stop bleeding. Rewired down to 12 ohms and now its the purest, delicious bass you can imagine. If i ever need to blow the clothing off an entire stadium of people, i'll go back to 3 ohms. Feels good knowing i've got that much headroom, actually. And with the lower-power configuration, everything stays blissfully cool with no interruption to performance or my car's lights (yes, the 3 ohm config dimmed my lights with the lower bass. lol.). Buy it. Buy it now.
Date de publication: 2016-01-04
Rated 5 de 5 de par The best subwoofer ever I love it, excellent. It is not comparable to any subwoofer. A unique design
Date de publication: 2015-08-29
Rated 5 de 5 de par I believe these subs are the best on the market I changed my systems from Polk which I loved and thought I would try JBL. I believe I have falling in love all over again because I am totally blown away by the clarity of my system which consist of P660c, gto329, p662, p963, 3each w12gti wkii subs, gto1001ez sub amp and gto 840ez 4 channel amp AWESOME!"
Date de publication: 2013-08-02
  • y_2018, m_12, d_11, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_fr_BE, sid_w12gtimkii, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_jbl

What is the best amp for this sub

Posée par: Binzz
Thank you for your question, you can use the GTR 1001 amplifiers
Répondue par: Randy at JBL
Date de publication: 2017-12-02

How many cubic feet should an enclosure be for 2 of these

Posée par: Cade
Assuming you are building a sealed enclosure, 1 cubic foot is recommended for 1 speaker. If you are running 2 speakers in the same box, all you have to do is double the space, making it 2 cubic feet.
Répondue par: Joe G at Customer Service
Date de publication: 2017-12-02

What kind of box will I need for this sub to reach it's full potential

Posée par: xavier
Thank you for your question here is the Box parameters THIELE-SMALL PARAMETERS VOICE COIL DC RESISTANCE: REVC (OHMS)* . . . . . 3.20 VOICE COIL INDUCTANCE @ 1 KHZ: LEVC (MH)* . . . . . . 0.75 DRIVER RADIATING AREA: SD (FT2) . . . . . . . . 0.516 SD (M2) . . . . . . . . 0.048 MOTOR FORCE FACTOR: BL (TM)* . . . . . . . 14.64 COMPLIANCE VOLUME: VAS (FT3) . . . . . . . . 1.58 VAS (LITERS) . . . . . 44.75 SUSPENSION COMPLIANCE: CMS (µM/N) . . . . 135.28 MOVING MASS, AIR LOAD: MMS (GRAMS). . . . 184.80 MOVING MASS, DIAPHRAGM: MMD (GRAMS) . . . 178.72 FREE-AIR RESONANCE: FS (HZ) . . . . . . . . 31.83 MECHANICAL Q: QMS . . . . . . . . . . . 6.68 ELECTRICAL Q: QES . . . . . . . . . . . . 0.55 TOTAL Q: QTS . . . . . . . . . . . . 0.51 MAGNETIC-GAP HEIGHT: HAG (IN) . . . . . . . . . 1.00 HAG (MM) . . . . . . . 25.40 VOICE-COIL HEIGHT: HVC (IN) . . . . . . . . . 2.60 HVC (MM) . . . . . . . 66.04 MAXIMUM EXCURSION: XMAX (IN) . . . . . . . .0.80 (ONE-WAY LINEAR) XMAX (MM) . . . . . . 20.32
Répondue par: Randy at JBL
Date de publication: 2017-12-02

How deep is this speaker 

Posée par: Shawndod 259
Hello, Thank you for your inquiry. This is the information you requested. Mounting Dept: 10-1/4" (260mm) Best Regards.
Répondue par: Zoltan
Date de publication: 2017-12-02

Is a sealed enclosure recommended over a vented one? If so how much airspace should an enclosure of each type allow for this woofer?

Posée par: TyLane14
Thank you for your question, this would be a user specific question.. depending on the genre or music you are playing can vary on different boxes and types.. ex.. if you listen to hip hop, heavy bass you would want a vented speaker box.. for Jazz and easy listening sealed box would be good for bass to roll out.
Répondue par: Randy at JBL
Date de publication: 2017-12-02

Can I run this speaker at 12ohms with a jbl gto14001 amplifier?

Posée par: Kali
Absolutely. Connect the voice coils in series and you're good to go.
Répondue par: Joe G at Customer Service
Date de publication: 2017-12-02

Are you going to be getting more of these in stock or are they being discontinued?

Posée par: marks
Unfortunately, the W12GTi MkII is already being discontinued and we are not expecting stocks to be replenished.
Répondue par: Amir at Customer Service
Date de publication: 2017-12-02

I have a pair of these is is worth it to run 8 gauge wire on the terminaks

Posée par: Jason123
The W12GTi MkII is a 700W RMS and normally, 14-16 gauge wires is more than enough for most installations.
Répondue par: Ren at Customer Service
Date de publication: 2017-12-02
  • y_2018, m_12, d_11, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_fr_BE, sid_w12gtimkii, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_jbl